Why Use An Intelligent Logistics Sorting System
Time:
09 Dec,2022
Logistics express delivery is generally after the warehouse delivery, sorting and then transported to each area, we will look at the application of the spiral chain conveyor before indicating and mastering some of its repair expertise also has encountered difficult defects in the solution. In addition to this kind of accidents that we should pay attention to in operation, we should also pay attention to the maintenance tricks and ways of spiral chain conveyor on a daily basis to increase its service life. As the price of spiral chain conveyor is much more expensive than the general conveying machinery and equipment, the maintenance of spiral chain conveyor looks especially in the key. This intelligent logistics equipment Limin Technology high-speed you about the conveyor knowledge

Spiral chain conveyor to maintain the case, not only the hardware configuration outside maintenance, but also to pay attention to the software maintenance, often referred to as software maintenance is the main operator must get rid of the actual operation of the machine and equipment bad habits and ways.
First chain conveyor reducer maintenance. After three months of the first application of spiral chain conveyor, the oil in the engine gearbox should be emptied itself, put neatly, and clean up the interior of the gearbox with diesel engine or car gasoline, put neatly after the new lubricating oil must be added to the middle of the sight window immediately. After that, it must be changed once a year, but we should pay attention to too much lubricating oil will cause the gearbox to be hot, the motor load is too large will cause the overload protector to disconnect, if the lubricating oil is too little will also cause the gearbox to be hot, so that the noise expands.

Subsequently, the maintenance of chain conveyor drive chain is also indispensable. If the drive chain is used for too long, the original lubricating oil will be hot and evaporate, resulting in common failures such as unbalance and noise in operation. If you encounter such difficulties, you can open the connecting plate of the rudder and raise the unsalted butter or a thicker lubricant.
Then there is the maintenance of the chain conveyor engine motor repair and maintenance. Inside the motor is not allowed to seep water, including the motor plus diesel or liquid and other organic matter, if the seepage of water will cause the destruction of the insulation layer of the motor and common failures of machinery and equipment.

When we buy sorting and conveying equipment, we need to pay attention to the correct rate of sorting. In the previous assembly line, people would be used to sort, but the efficiency was low and the sorting speed was slow, so they started to use sorting systems to sort, and the accuracy and efficiency were greatly improved.
2022-12-09 | Limin Group
Share to
freya.ren@limin-global.com
0086-15093376710



